Electric Actuated Gate Valve Manufacturer

Are you looking for the best electric actuated gate valve manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer In Italy. An electric actuated gate valve is a type of flow control valve that uses an electric actuator to control the flow of fluid through the valve. The valve body is typically a gate shape, which allows for precise control of the flow rate.

The electric actuator converts an electrical signal into mechanical movement, which in turn opens or closes the valve. When the valve is in the closed position, the gate is in contact with the seat, which blocks the flow of fluid. When the valve is in the open position, the gate is lifted away from the seat, allowing fluid to flow through. The position of the gate is controlled by the electric actuator, which moves the stem of the gate valve up and down to open and close the valve.

The use of an electric actuator in a gate valve allows for remote control and automation of the valve, as well as precise control of the flow rate. They are widely used in various industries and applications, where precise flow control is needed.

Valvesonly Europe is the greatest Electric Actuated Gate Valve Manufacturer. It is famous for its premium quality products which come in various material and sizes. All the products are tested according to the requirements and standards of the clients.

A typical Electric Actuated Gate valve consists of:

1)Electric Actuator

2)Gate Valve

3)Positioner

4)Limit Switch

Advantages of Electric Actuated Gate Valve:

1)It can be installed underground as well as above ground.

2)This valve has an amazing closing characteristic.

3)These valves can be used in a circuit both ways.

4)Pressure loss is minimum

Industries of Electric Actuated Gate Valve:

1)Oil and Gas

2)Power Generation

3)Water and wastewater treatment

4)Chemical and petrochemical

Parts of Electric Actuated Gate Valve:

1)Valve

2)Gate

3)Stem

4)Seals

5)Bonnet

6)Handwheel

Description:

Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L, WCB, WCC, WC9, WC6

Size: DN15 to DN700

Pressure: PN10 to PN450,150 to 900

End: Flanged, Socket weld, Butt weld.

Operation: Electric actuated.

Electric actuator details-

1)Torque – 3 – 9 nm

2)Operating pressure- 8 Bar

3) Port Connection-NPT1.4”

4) Mounting Base-ISO5211

5)Temperature--20°C - +80°C

For more details visit here: https://www.valvesonlyeurope.com/product-category/electric-actuated-gate-valve/