Valvesonly Europe is the leading Pneumatic Actuated Ball Valve Manufacturer in Germany. A pneumatic actuated ball valve is a type of control valve that uses compressed air or gas to control the flow of fluid in a pipeline. It consists of a ball inside the valve body that rotates to open or close the flow path. The valve is controlled by a pneumatic actuator, which converts the air pressure into mechanical motion that opens or closes the valve.
The working principle of a pneumatic actuated ball valve is based on the interaction between the ball and the fluid in the pipeline. The ball inside the valve body rotates around its axis to either align with the flow path and allow fluid to pass through (open position) or block the flow path and prevent fluid from flowing (closed position).
The pneumatic actuator converts the air pressure from the compressed air source into mechanical motion that opens or closes the valve. The actuator is controlled by a pneumatic signal from a control system, which directs the valve to either open or close based on the desired flow rate. In this way, the pneumatic actuated ball valve provides precise control over the flow of fluid in a pipeline, making it an effective and widely used solution for various industrial applications.
Valvesonly is the best Pneumatic Actuated Ball Valve Manufacturer in Germany which is famous for its premium quality products which come in various materials and designs. All the products are tested according to the requirements and standards of clients.
Features of Pneumatic Actuated Ball Valve:
1)It gives a greater flow.
2)It has both sides seals covered with Internal balls and can give tight shutoff even after years of operation.
3)Quick opening and quick closing features.
4)Actuator is compact.
Industries of using Pneumatic actuated Ball Valve:
1)Construction Industry
2)Medicine Industry
3)Electric Power Industry
4)Textile Industry
5)Water Industry
Description:
Body: Cast Iron, Cast steel (WCB, WCC, WC6, LCC, LCB), Carbon steel (CF8, CF8M), Titanium, Stainless steel (SS304, SS316, A105, F304, F304L, F316, F316L).
Class: 150-2500, PN 10 - PN450.
Size: ½” to 48”.
Ends: Socket weld pneumatic actuated ball valve, butt weld pneumatic actuated ball valve, flanged pneumatic actuated ball valve, threaded pneumatic actuated ball valve.
Operation: Pneumatic actuated.
Configuration of a Pneumatic Actuator:
1)4-20 Mamp
2)Pneumatic single acting actuators
3)Pneumatic double acting actuators
4)Pneumatic rotary actuators
5)Pneumatic Scotch and Yoke actuators
6)Pressure: 228 bar
Temperature:
1)Standard -4°F to 200°F (-20°C to 93°C)
2)Low -40°F to 176°F (-40°C to 80°C)
3)High 0°F to 300°F (-18°C to 149°C)
https://www.valvesonlyeurope.com/product-category/pneumatic-actuated-ball-valve/